================================================================================
                                样例使用说明
                             Sample Description
================================================================================
功能描述：
本样例主要展示GPIO的FAST IO输出功能。FAST IO速度可以达到单周期翻转速度。

Function descriptions:
This sample demonstrates the FAST IO output functionality of GPIO. FAST IO 
speed can achieve single-cycle toggling speed.
================================================================================
测试环境：
测试用板：PY32T092_STK
MDK版本： 5.28
IAR版本： 9.20
GCC版本：GNU Arm Embedded Toolchain 10.3-2021.10

Test environment:
Test board: PY32T092_STK
MDK Version: 5.28
IAR Version: 9.20
GCC Version: GNU Arm Embedded Toolchain 10.3-2021.10
================================================================================
使用步骤：
1. 编译下载程序到MCU，并运行；
2. GPIO每个时钟周期输出翻转一次，可观测到端口PA11输出波形输出波形频率为4MHz。


Example execution steps:
1.Compile and download the program to the MCU and run it.
2.The GPIO output toggles once per clock cycle, and you can observe the output 
waveform on pin PA11 with a frequency of 4MHz.

================================================================================
注意事项：

Notes:

================================================================================